Na khoele ea tungsten carbide nozzle e bohlokoa?

I. "Lifeline" ea "Lifeline" ea Indasteri e hlokomolohuoang: Litlamorao tse 3 tsa Khoele ho Ts'ebetso ea Nozzle

Maemong a khatello e phahameng le a aparetsoeng haholo joalo ka ho cheka oli, merafo le ts'ebetso ea tšepe, likhoele tsa li-nozzle tsa tungsten carbide li feta "lihokelo" feela. Ke lintlha tsa bohlokoa tse khethollang botsitso ba lisebelisoa, katleho ea tlhahiso, esita le menyako ea polokeho. Ka tlase, re sekaseka bohlokoa ba likhoele ka maemo a mararo a mantlha:

1. Ts'ebetso ea ho Tiisa: Tahlehelo ea Lidolara tse Milione e Bakiloeng ke Phoso ea 0.01mm

2. Matla a Sebopeho: "Khoutu e Khahlanong le ho Lokoloha" Libakeng tse sisinyehang

Maemong a ts'ebetso a nang le vibrate ea maqhubu a holimo (lisebelisoa tsa ho cheka) kapa tšusumetso e tsoelang pele (mochini oa merafo), moralo oa likhoele o ama bophelo ba ts'ebeletso ea nozzle ka kotloloho:

• Mathata ka likhoele tse tloaelehileng:
  ■ Khatello ea maikutlo ka lebaka la ho kheloha ha leino la meno, lebelo la ho lokoloha le feta 40% nakong ea likhoeli tse 3.
  ■ Ha ho na phekolo e thibelang ho lokoloha, 60% e ekelitse kotsi ea ho roala le ho robeha ha khoele tlas'a ho sisinyeha ha nako e telele.
• Tharollo ea rona:
  Sebopeho se khethehileng sa leino la trapezoidal (e ntlafalitsoeng ka 15 ° angle), 50% e ntlafalitse kabo ea khatello ea maikutlo
  Ho roala ha Tungsten carbide holim'a likhoele, 2x e matlafalitsoeng ho hanyetsa, bophelo ba ts'ebeletso bo atolosoa ho feta likhoeli tse 12.

3. Tšebelisano ea Lisebelisoa: "Senotlolo sa Bokahohle" bakeng sa Maemo a Mosebetsi oa Lefatše

Liphapang tsa maemo a khokahano ea lisebelisoa ho pholletsa le linaha/litikoloho (mohlala, NPT ea US, BSP ea UK, M series in China) e etsa hore khetho ea mehlala e be phephetso:

• Matla a rona a ho etsa likhoele:
  Ts'ehetsa maemo a 10+ a machaba (sheba Letlapa la 1)
  Libopeho tse ikhethileng tsa meno (mohlala, khoele ea buttress, 惠氏螺纹) ho latela litšoantšo tsa bareki.
  Fana ka limaraka tsa ho mamella likhoele (sehlopha sa ho nepahala 6H/6g ho isa sehlopheng se akaretsang sa 8H/8g)

Lethathamo la 1: Lethathamo le ka Sehloohong la Maemo a Machabeng a Tšebelisano Maemo

II. U ka ahlola joang haeba likhoele tsa Tungsten Carbide Nozzle li kopana le litekanyetso? Litekanyo tse 4 tsa ho Khetholla li senotsoe

Ho khetha likhoele tsa boleng bo holimo ho hloka ho tsepamisa maikutlo ho bokhoni ba moetsi oa theknoloji:

1. Lisebelisoa tsa ho sebetsa: Hore na o sebelisa Sejeremane Zeiss CMM le Japanese Mazak CNC grinders (ho nepahala ho fihla ho 0.001mm)
2. Litekanyetso tsa Teko: Hore na e netefalitsoe ho API Spec 5B (indasteri ea petroleum) kapa ISO 4776 (indasteri e akaretsang)
3. Phekolo ea Bokaholimo: Hore na o fana ka litharollo tse thibelang ho bola joalo ka nickel plating, nitriding, kapa PVD coating (maemo a lebopo a hloka tlhahlobo ea setlolo sa letsoai ≥500 lihora)
4. Lintlha tsa Tlhahlobo: E hloka 实测报告 (litlaleho tse lekantsoeng) bakeng sa bophara ba molumo, sekontiri se phahameng, le angle ea meno (joalokaha ho bontšitsoe setšoantšong sa 2)

(Tlhaloso ea setšoantšo: Mohlala oa tlaleho ea tlhahlobo ea CMM bakeng sa likhoele, e bonts'ang boleng bo lekantsoeng khahlano le litekanyetso tse tloaelehileng bakeng sa liparamente tsa bohlokoa)

III. Melemo ea rona ea likhoele: Lintlafatso tse 3 ho tloha ho "Sebelisa" ho ea ho "E tšoarellang"

Joaloka moetsi oa tungsten carbide ea lilemo tse 18, moralo oa rona oa likhoele o kenyelletsa mahlale a mararo a mantlha:

1. Ntlafatso ea Lintho tse Bapisang

• Bakeng sa WC-Co tungsten carbide, masoba a ka tlase a likhoele a sebelisa moralo oa "interference fit + groove" ho qoba ho robeha ha brittle
• Alloy matrix e nang le 10% -15% cobalt content, e kopantsoeng le HRC85-90 thread surface hardness, e finyella ho leka-lekana ho tsitsitseng-ductility

2. Taolo ea Ts'ebetso e Felletseng

• Ts'ebetso ea bohlokoa: Ho sila likhoele ho sebelisa mabili a daemane a nang le phepo e le 'ngoe ≤0.005mm
• Tlhahlobo ea boleng: Teko ea mokhathala oa potoloho ea 5000-cycle bakeng sa sehlopha se seng le se seng ho etsisa bophelo ba lisebelisoa tse felletseng.

3. Litharollo tsa Global Adaptation

• Liaparo tsa likhoele tse thibelang serame bakeng sa maemo a batang haholo Russia (-50 ℃)
• Mehaho ea likhoele tsa matšeliso a katoloso ea mocheso bakeng sa maemo a mocheso o phahameng / khatello e phahameng Bochabela bo Hare (150 ℃/1500bar)

IV. Nka Khato Hona Joale: Mehato e 3 ea ho Fumana Tharollo ea Hao e Tloaelehileng ea Khoele

1. Etela sebaka sa rona sa marang-rang: https://www.kedelcarbide.comTlatsa liparamente tse amehang tsa tekheniki 'me u sebelise lisebelisoa
2. One-on-One Technical Consultation: Fumana tharollo e ikhethileng (ho kenyeletsoa litšoantšo, litlhahiso tsa thepa, le likhakanyo tsa litšenyehelo) ho tsoa ho lienjiniere nakong ea lihora tse 72.
3. Tlhahlobo ea Mehlala ea Mahala: Etsa kopo ea disampole tse 3 tsa mahala bakeng sa odara ea pele, e tšehetsang netefatso ea boemo ba mochini oa 'nete

Qetello: Ha thepa ea hau e sebetsa ka mokhoa o tsitsitseng maemong a feteletseng 'me litšenyehelo tsa tlhahiso ea hau li fokotseha ka lebaka la ho fokotseha ha ho lutla le ho fetola khafetsa, boleng ba likhoele tsa boleng bo holimo boa hlaha. Ho re khetha ha ho bolele feela ho khetha karolo, empa tharollo e tšepahalang e netefalitsoeng ke linyeoe tse 200+ tsa indasteri.

Ikopanye le Rona Hona Joale: info@kedetool.com | Tel: +86-15928092745 (Note “Thread Solution” for priority quotation)